Changed Ford Computer Car Won’t Start
772-918-0720
Changed Ford Computer Car Won’t Start. This is common problem that many people don’t realize when they change there computer in the car or truck it won’t start unless you do the following.
A Lenny Locksmith Port St Lucie does these blogs to help people save time, money and aggravation. When you change the computer there a couple of things to know. First you can order a computer from the dealership or online and match the vin and it should work fine. That can be costly so there are other ways that make it cheap and affordable especially if the car or truck is older and you don’t want to spend a lot of money on it.
A Lenny Locksmith Port St Lucie will always answer questions on the phone but we will tell you know the best way to go. You can goto junk yard and find the same model car or truck. After you find the truck or car that matches yours. You proceed to remove the computer which is usually on passenger side but you can always check online or in manual. Second step is to remove the transponder ring that is a black piece around the ignition and is plugged in. It easily unplugs. 3rd and last step is removing the cluster. The cluster is where you see on your dash how fast you are going. It has to be removed and taken out. The good thing if you break anything you are in the junkyard and can move to next similar car. By the time you go back to your car you will no the best way to take it apart so I recommend goto junkyard first and get the three things first. REMEMBER these items have to be out of the same car and you need all three to work.
When you go back home put all three in the car and call A Lenny Locksmith Port St Lucie and we will program key again and you will be ready to go.
Changed Ford Computer Car Won’t Start
772-918-0720